Costly Aerial Installation Mistakes to Avoid
January 6, 2021
180 viewsTaking the DIY approach can make the process more difficult than it actually is. If you do decide to do it by yourself, look out for these costly mistakes you should avoid.
TV aerial installation is a pretty straightforward affair - the technician comes in, checks for the best antenna location and installs the equipment (usually on the rooftop). Then, they configure your TV to receive the channels, and that’s that.On the other hand, taking the DIY approach can make the process more difficult than it actually is. If you do decide to do it by yourself, look out for these costly mistakes you should avoid.
1. Unstable Antenna Installation
It's important to make sure that your aerial installation is secure, especially if it’s outdoors. Strong winds, heavy rains and the elements can break down the foundation or knock the aerial off its perch and cause possible structural or property damage.Trust only the professionals for a tv antenna installation. AntennaPros offers fast and affordable, high quality aerial installations in the Waterloo and Sydney area.
2. Wrong Type of Antenna
Homeowners may assume that one antenna works for all, but then they’d realize that it’s a costly mistake. In that case, when you turn on the TV, you will most likely get signal strength problems even when it’s pointed in the right direction and high enough to receive proper broadcasting.A TV aerial installer will know the right antenna for your needs, so you won’t have to buy two antennas.
3. Buying an Amplifier Even When You Don’t Need It
Most people tend to buy an amplifier as they’d assume the stronger the signal, the better the reception. Unfortunately, in some cases, an amplifier may cause interference and do more harm than good.It's better to consult a reliable TV antenna specialist company before buying an amplifier.
4. Using an Old Coax Cable
Cable integrity is just as important as the antenna, the receiver and the TV unit. An old coax can cause issues such as reception, static and sometimes even a ‘no signal found’ error.Replacing an old coax cable with a new one is time-consuming as you’ll need to connect it to the TV and the aerial. Moreover, you will need to do some cable management processes.Here at AntennaPros, our antenna installation experts can check and see if your cables are at par with the reception and installation. They can replace it with higher quality ones to ensure smooth programming.
Need more information?
Source: loop21
Categories:Science & TechnologyTelecommunications