The Easiest Ways To Clean Your Bathroom

Grimy walls, soap scum on a showerhead, mineral deposits on a bathtub and yellow stains in a toilet seat may give you a nightmare when you decide to clean up your bathroom. Of course, this particular area of your house deserves thorough sprucing and special attention.

Ideal Bathroom Centre is the best bathroom supply store in Macquarie Park and there is nothing related to the bathroom you can't find at our showroom.

---

However, if you are looking for the most effective and easiest ways to transform your dirty bathroom, then keep on reading the article. The following tips are shared by highly-trained and experienced cleaners:

1. Get rid of Unnecessary Items

Prepare your bathroom for a thorough cleaning and scrubbing. First, remove all the items that don’t belong to this particular room. Toss empty bottles of shampoos, conditioners, used towels, rugs, and other items. Also, throw the trash and put the can outside your bathroom. Staying away from distractions will help you achieve the best possible results in less time.

2. Dusting from the Top

It is always to start from the top of a room to get rid of accumulated dust, dust mites, dirt and grime. So, take a long-handled duster and remove cobwebs from the walls and light fixtures. Also, dust the vents, light switches, cabinets, and other surfaces. You can also vacuum clean the exhaust fan to eliminate the thick layer of dust and pollens. Make sure you have a stepladder to reach high spots in your bathroom.

3. Clean Shower and Bathtub

There is no denying the fact that soap residue, built-up gunk, body soil and oil stains can make the surface of your shower and tub look gloomy and dirty. Also, faucets, showerheads, and tub rims are breeding grounds for mould and mildew. This means you need to put extra effort to take the nasty black spores out of your shower and tub using the right products and tools. Here is a quick cleaning guide for you: Spray the Solution: Spray white vinegar, dishwashing liquid soap and warm water solution on the showerhead and leave it for a few minutes. For a bathtub, apply baking soda and warm water paste and let it sit for 15 minutes. Scrub! Scrub! Scrub: The cleaning solution will break down the tough soap scum, grime and stains. So, this step is about scrubbing the stains using an abrasive pad. You can also use brushes or an old toothbrush to get into the cervices. Rinse Thoroughly: Rinse off the surface using clean water. Repeat the process if required to bring back the lost shine of bathroom showers and tubs.

4. Wipe Off Other Hard Surfaces

Do not forget to clean the surfaces like shelves, doors, windows, blinds, baseboards, towel racks, etc. Spray the multi-purpose solution on a clean microfiber cloth and wipe down all the surfaces. Spruce up in top to bottom and left to right manner to streamline the entire cleaning process.

5. A Bathroom Counter and Sink

A bathroom counter collects daily debris, dust, dirt and grime that needs to be cleaned regularly. So, make sure you keep it sparkling clean using eco-friendly products. Spray the cleaner on the surface- every nook and cranny and leave it for 10 minutes. Now, scrub the stains and mineral deposits off using a soft-bristled brush. Rinse it with clean water. Do not forget to wipe off the faucets, sink and cervices.

6. Toilet

Nobody wants to clean the filthy toilet seat. But, it harbours germs, bacteria and unpleasant odours if you don’t spruce up daily. Try these ways to keep it clean and shiny: Apply the cleaner: Put toilet cleaner into the bowl and allow it to break down mineral deposits, yellow stains and kill germs. Brush Up: Make sure you have a good quality bowl brush that can go nooks and crannies of your toilet brush. Cover the toilet rim to remove hidden stains and deposits. Scrub Off: If the stains are stubborn, then use the pumice stone. Rub the stone on the surface and remove the deposit with ease.

7. Shower Glass Doors

Pay special attention to shower glass doors because they are delicate. Remove soap scum and mineral deposits using a non-abrasive cleaner. First, spray the all-purpose cleaner and then wipe off the surface. You can use a squeegee to get rid of soap residue and extra water.

8. Clean the Tile Grout

First, wash the tile grout with warm water and scrubber. Add baking soda and apply it to the dirty and mouldy tile grout. Rub the surface with an old toothbrush to get rid of mould and mildew and tough stains from the lines between tiles.

9. Mop the Floor

Vacuum the floors to get rid of loose debris, dust, dirt and other grime. After that, mop the floor and spot clean if required using a homemade cleaner.

Conclusion

Achieve a clean and sparkling bathroom with the help of these tips and tricks.

If you are looking for bathroom specialists in Macquarie Park, do not hesitate to call or visit Ideal Bathroom Centre today!