DIMAX TYTON XCEL

DIMAX TYTON XCEL DIMAX TYTON XCEL is a high strength, easy to design cement-lined ductile iron pipe. Synonymous with the introduction of pressure class DI pipe into Australia, DIMAX XCEL is manufactured to AS2280 and AS4020, making it suitable for potable water, raw water, irrigation and bore water pipelines above and below ground. Exclusively featuring with the TYTON® push-fit joint, making XCEL to be easily installed. Available with DIMAX Z+ Coating. AT A GLANCE DIMAX XCEL is available from DN100 to DN750 in PN25/30 and PN35, providing peace of mind against water hammer surges, varying soil and traffic loads, cyclic stresses and unforeseen rigors of a pipe system. Seal Coat can be applied to cement lining surface to inhibit the leaching of lime where aggressive, soft waters of low hardness (total alkalinity <30mg/L) or high dissolved CO² are being conveyed. SPECIFICATIONS Manufactured to AS2280 Water Contact Approval to AS4020 WSAA Appraised Pressure Classes PN35 & PN30/25 DIMAX XCEL is capable of satisfying your needs for the following applications, above or below ground: Potable water Raw water Irrigation Bore water Lining Sulphate Resisting Blast Furnace Slag Cement Seal Coat over Cement lining is available as an option Coating Hot Metallic Zinc Spray at 200GSM Black Two Part Epoxy Coating at 100µm FEATURES Damage resistant Critical buckling resistant Easy to design and specify Can be laid in narrow/shallow trenches Suitable for wide range of depths No Long term reduction in pipe stiffness Ductile Iron compensates for unforeseen environmental changes Minimises on-site Damage Ductile Iron compensates for unforeseen environmental changes Centrifugally spun Type SR (sulphate resisting) Cement mortar lining Long design life WSAA Approved