DIMAX TYTON XCEL Z+

DIMAX TYTON XCEL Z+ DIMAX TYTON XCEL Z+ is a corrosion protected, high strength cement-lined ductile iron pipe suited for potable, recycled and raw water. DIMAX Z+ Coating extends the service life of your pipe and reduces on-site handling by erasing the need for sleeving, see DIMAX Z+ Coating for more information. Manufactured to AS2280 and AS4020, XCEL Z+ features the TYTON® push-fit joint, making for easy installation. AT A GLANCE DIMAX XCEL Z+ is available from DN100 to DN750 in PN25/30 and PN35, maintaining efficiency and cost savings without sacrificing superior performance. Coated with zinc, aluminum and rare earth metals for sleeveless installation and corrosion protection. Seal Coat can be applied to cement lining surface to inhibit the leaching of lime where aggressive, soft waters of low hardness (total alkalinity <30mg/L) or high dissolved CO² are being conveyed. SPECIFICATIONS Manufactured to AS2280 Water Contact Approval to AS4020 WSAA Appraised Pressure Classes PN20 & PN35 Lining Sulphate Resisting Blast Furnace Slag Cement Seal Coat over Cement lining is available as an option Coating Blue Two Part Epoxy Coating at 100µm FEATURES Corrosion resistant Damage resistant Critical buckling resistance Active protection Removes the need for sleeving Extends Pipeline service life Can withstand transport and installation rigors Centrifugally spun Type SR (sulphate resisting) Cement mortar lining Easy installation PN35 Provides peace of mind for water hammer surges, varying soil and traffic loads and cyclic stresses Suitable for wide range of depths WSAA Appraised Manufacturing certified to ISO9001