DIMAX TYTON XTREME

DIMAX TYTON XTREME pairs the proven strength of ductile iron, TYTON® push-fit joints with CAC calcium aluminate cement (CAC) in order to provide an effective and high resistance to aggressive fluids with a high pH value, sewage and industrial waste. TYTON XTREME provides a high strength sewage option for reliable and simple installation in any weather condition. AT A GLANCE DIMAX TYTON XTREME is available from DN100 to DN750 in PN25/30, PN25 and flange class. Manufactured to AS2280, TYTON XTREME is WSAA appraised and approved. CAC is recommended for sulphate levels up to saturation for continuous pH values down to 4 and for hydrogen sulphide levels up to 10mg/L. SPECIFICATIONS Manufactured to AS2280 WSAA Appraised and Approved Pressure classes PN20 & PN35 Coating Hot Metallic Zinc Spray at 200GSM Red Two Part Epoxy Coating at 100μm Epoxy applied to internal Socket profile and Spigot Lining Calcium Aluminate Cement (CAC) (as specified in AS/NZS 2280) is recommended for sulphate levels up to saturation for continuous pH values down to 4 and for hydrogen sulphide levels up to 10mg/L. Cement Sulphate limit mg/L CAC to EN 14647* No Limit Continuous exposure pH limit >= 4.0 H2S limit mg/L < 10 *With the exception of the 6 hour strength requirement (i.e., as specified in AS/NZS 2280) FEATURES Chemical resistant Abrasion resistant Can be installation in any weather conditions Withstands water hammer surges, cyclic stresses, unpredictable traffic and soil loads (PN35 only) Coating: Hot Metallic Zinc Spray at 200GSM, Red Synthetic Resin Coating at 100μm, Epoxy applied to internal Socket profile and Spigot H2S limit mg/L: < 10 Continuous exposure pH limit: >= 4.0 Cement Sulphate limit mg/L (CAC to EN14647): No limit with the exception of the 6 hour strength requirement as specified in AS/NZS2280